V-Kote Tek™- The Ultimate Deck Waterproofing System

Any waterproofing system is only as good as its weakest point. With over 30 years in the deck waterproofing industry, DEC-K-ING knows from experience where water is most likely to infiltrate the building envelope. V-Kote Tek™ is engineered to add protection to the most critical areas of a project, offering PVC coated accessories and pre manufactured solutions to ensure factory consistency throughout. Reinforced PVC membrane details previously impossible to make, extending in multiple directions, are now manufactured by sophisticated electronic equipment. V-Kote Tek™ is the most technologically advanced deck waterproofing system on the market.

Click on the pictures below for close-ups.

Waterproofing system components

V-KOTE TEK Corners Corners:
Every corner is sealed 100% and is consistent throughout the project.
V-KOTE TEK PVC coated metal flashing PVC Coated Metal Flashing:
Membrane is heat welded permanently to top of PVC coated flashing rather than bent over flashing which only adds stress to the membrane.
V-KOTE TEK Termination Termination:
Wall/deck transition piece protects structure from water returning off the drip flashing.
V-KOTE TEK Scupper Scuppers & Overflows:
Spun aluminum, PVC coated unit; deck membrane heat welded to flange. A special skirt is also welded to outside wall. Seals permanently inside and outside of structure.
V-KOTE TEK Drain Drains:
One- piece metal drain is PVC coated. Membrane is permanently heat welded to drain. No glue. No caulking.
Image soon Post Boot:
The entire post is wrapped in one piece with the overlap heat welded to the PVC membrane.
V-KOTE TEK Door Corner Boot Door Corner Boot:
Protects the critical area with a one-piece factory made unit.
V-KOTE TEK Downspout boot Downspout Boot:
One-piece, factory made downspout boot seals the entire unit.
Railing Boot Railing Boot:
Keeps water away from the base and fasteners.
Boot is heat welded permanently to the deck membrane.
V-KOTE TEK Railings on parapet walls Railings on Parapet Walls:
Railing base plate is chemically bonded to a 60-mil PVC membrane and fused to the PVC coated flashing. Railing base plate is also sealed to the PVC membrane with a PVC rod.